Ironwood-electronics Probe Board With GHZ BGA Socket Assembly Instructi Instrukcja Użytkownika Pobierz pdf

Socket Base

Filename: GPI.mcd, Rev A, 1/18/00, IP

Socket

Top Assembly

Compression Screw

Compression plate

BGA Package

Z-Axis Elastomer

Machine Screw

Socket Lid

Ironwood Electronics Probe Board with GHz BGA socket

Probe board

Test Points

Alignment plate

Probe Board with GHZ BGA Socket

Assembly Instructions

Tele: (800) 404-0204

www.ironwoodelectronics.com

1. Place the square piece of elastomer provided into the socket base (rotational and 'side up' orientation are not critical).

2. Adjust the elastomer to sit into the alignment plate cavity.

3. Place BGA package (solder ball side down) into the socket. NOTE: BGA orientation on target PCB is critical.

4. Place the compession plate (if required*) on top of the BGA package.

5. Install the socket top assembly with the hardware provided (four 0-80 screws).

6. Turn the compression screw clockwise, until it makes contact with the compression plate or the BGA package.

7. Turn an additional quarter-turn.

*Ironwood Electronics technical staff will determine (from your package spec) if a compression or alignment plate is required

Assembly Instructions 1

Podsumowanie treści

Strona 1 - Assembly Instructions

Socket BaseFilename: GPI.mcd, Rev A, 1/18/00, IPSocketTop Assembly Compression ScrewCompression plateBGA PackageZ-Axis ElastomerMachine ScrewSocket Li

Komentarze do niniejszej Instrukcji

Brak uwag

Ironwood-electronics Probe Board With GHZ BGA Socket Assembly Instructi Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Sprzęt komputerowy Ironwood-electronics Probe Board With GHZ BGA Socket Assembly Instructi. Ironwood Electronics Probe Board With GHZ BGA Socket Assembly Instructions User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Ironwood-electronics Probe Board With GHZ BGA Socket Assembly Instructi